Home ProductsSteel Plate Straightening Machine

Energy Efficiency Steel Plate Straightening Machine Semiautomatic Feeder

Energy Efficiency Steel Plate Straightening Machine Semiautomatic Feeder

    • Energy Efficiency Steel Plate Straightening Machine Semiautomatic Feeder
    • Energy Efficiency Steel Plate Straightening Machine Semiautomatic Feeder
    • Energy Efficiency Steel Plate Straightening Machine Semiautomatic Feeder
    • Energy Efficiency Steel Plate Straightening Machine Semiautomatic Feeder
  • Energy Efficiency Steel Plate Straightening Machine Semiautomatic Feeder

    Product Details:

    Place of Origin: Guangdong, China (Mainland)
    Brand Name: RUIHUI
    Certification: CE, ISO certification

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 Set
    Packaging Details: Wooden Box or Vacuum Packing
    Delivery Time: 30 work days
    Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
    Supply Ability: 30 Sets Per Month
    Contact Now
    Detailed Product Description
    Place Of Origin: Guangdong, China (Mainland) Brand Name: RUIHUI
    Condition: New After-sales Service Provided: Field Maintenance And Repair Service, Engineers Available To Service Machinery Overseas
    Stock Width: 20~800mm Stock Thickness: 0.3~3.2mm
    Stock Thickness*Stock Width: 1.0*800/3.2*50 Pass Line: 70~170mm
    Releasing Performance: ~80 Motor: Yaskawa
    Bearing: Japan NSK Main Motor: AC2.9

    Plate straightening machine, sheet metal forming, roller feeder feeding step (MAC3-600)
     
    http://www.ruihui.net

    Roller feeder feeding step test method:
    1. Use the inching operation to stop the punch at the bottom dead center position, mark the material, and then punch the sheet once, and mark the material.
    After repeating this several times, the measurement is performed, and after comparing with the required feeding step, the adjusting screw is re-adjusted according to the demand to reach the required feeding distance.
    2. Inching operation punching machine, let the punch output shaft drive the roller feeder to feed the material into the punching die, ensure that the punching machine punches the guiding hole, and then injects to the punching machine more than 3 points, the guiding pin and the guiding hole The position was compared and determined.
    If the position of the guiding pin and the guiding hole are correct, it means that the step setting is correct, if it is not correct, it needs to be re-adjusted.
    3. When measuring the feeding step of the roller feeder, pay special attention to the inability to use the inching operation to stop the punch at the top dead center position measurement, because when the punch slider stops at the top dead center position.
     
    Feeding is not completed, usually only sent half, so each stop position will be different, the adjustment of the feeding step can not be measured correctly, so make sure that the punch slider stop position exceeds 3 o'clock position when measuring.
    punching machine
    Specification:
     

    ModelMAC2-400MAC2-500MAC2-600MAC2-800
    Stock Width(mm)50-40050-50050-60050-800
    Stock Thickness(mm)0.3~3.20.3-3.20.3-3.2-3.2
    Max.Coil Weight(kg)300030003000500050007000
    Max.Coil O.D.(mm)120012001200 
    Coil I.D.(mm)88508508
    Feed Length(mm)~500*~500*~500*~500*
    Max. Line Speed(m/min)16-2416-2416-2416-24
    Work Roll Number(pieces)upper 6
    lower 5
    upper 6
    lower 5
    upper 6
    lower 5
    upper 6
    lower 5
    Feed Roll Number(set)1111
    Main Motor(kw)AC2.9AC2.9AC4.4AC4.4
    Mandrel Expansionhydraulichydraulichydraulichydraulic
    Reel Motor(kw)1.51.51.52.22.23.7
    Power(V)3 Phase 220V/380V/50HZ
    Operating Air(Mpa)0.490.490.490.49


    Straigtening performance:
     

    tock Thicknees (mm)Stock Width (mm)
    0.3400500600800
    0.4
    0.6
    0.8
    1.0
    1.2
    1.4
    1.6470470
    1.8400400
    2.0360360
    2.3300300300300
    2.5230230230230
    2.8150150150150
    3.2110110110110


    *1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
    Energy Efficiency Steel Plate Straightening Machine Semiautomatic Feeder
    Energy Efficiency Steel Plate Straightening Machine Semiautomatic Feeder

    1. Pre-Sales Service:We have professional designers to meet the different requirement of our customers.
    2. After-Sales service:We have an efficient team to meet 24*7 all day service.
    3. Full-Service:Actively cooperate with customers to deal with problems in equipment using.
    4. Engineers can provide service machinery overseas.

    Contact Details
    Dongguan Ruihui Machinery Manufacture Co., Ltd.

    Contact Person: Calin Deng

    Tel: +8613826917409

    Send your inquiry directly to us (0 / 3000)

    Best Products
    Other Products