|Place of Origin:||Guangdong, China (Mainland)|
|Certification:||CE, ISO certification|
|Minimum Order Quantity:||1 Set|
|Packaging Details:||Wooden Box or Vacuum Packing|
|Delivery Time:||30 work days|
|Payment Terms:||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Supply Ability:||30 Sets Per Month|
|Stock Width(mm):||50~600||Stock Thickness(mm):||0.2~3.2|
|Line Speed(m/min):||16~24||Coil Weight(Kg):||3000/5000|
|Work Roll Number(Pcs):||Upper 6/lower 5||Main Motor(Kw):||AC 4.5|
|Warranty Period:||12 Months|
Punch light material rack equipment, steel stamping processing, material rack
The lightweight material frame has a compact structure and adopts a vertical receiving mode. When used, the winding shaft is disposed vertically on both sides of the discharge opening of the coiling plate, thereby reducing the occupation of the plane position.
The winding drum is composed of a plurality of struts, and the lower end of the struts can realize radial contraction, so that the waste side coil wound on the winding drum can be dropped by its own weight to realize automatic blanking.
The guiding device can realize the regularity, compactness and beauty of the waste edge after being wound into a roll, which greatly saves the labor cost, and can process the metal waste edge, which is a low value-using material, into a product with higher added value. Really bring convenience and value to customers.
In the actual processing and production, the light material frame is placed on both sides of the winding discharge port, and the "winding cylinder" composed of the disk, the six poles and the six short rods is vertically disposed above the waste side discharge point, with The coil is discharged, the material frame is operated, and the waste edge is neatly wrapped around the "winding drum" through the guiding device.
Winding to a certain extent, stopping the winding, pulling the rod upward, the cover, block and sleeve move upwards upwards, and the block and the short rod, the short rod and the strut, and the hinge point of the upper end of the strut constitute the linkage mechanism, because the block is vertical Move up.
The short rod is rotated around the hinge shaft of the short rod and the support rod, the radial distance of the hinge point is reduced, the lower end of the support rod is moved toward the shaft center as a whole, and the waste side coil wound on the "winding cylinder" is self-weighted. The role of falling, easy to operate, convenient and practical.
|Max. Line Speed(m/min)||16-24||16-24||16-24||16-24|
|Work Roll Number(pieces)||upper 6
|Feed Roll Number(set)||1||1||1||1|
|Power(V)||3 Phase 220V/380V/50HZ|
|tock Thicknees (mm)||Stock Width (mm)|
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
Contact Person: Calin Deng