|Place of Origin:||Guangdong, China (Mainland)|
|Certification:||CE, ISO certification|
|Minimum Order Quantity:||1 Set|
|Packaging Details:||Wooden Box or Vacuum Packing|
|Delivery Time:||30 work days|
|Payment Terms:||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Supply Ability:||30 Sets Per Month|
|Stock Width(mm):||50-400||Stock Thickness(mm):||0.3-4.5|
|Line Speed(m/min):||16~24||Coil Weight(Kg):||5000|
|Main Motor(Kw):||AC 4.4||Warranty Period:||12 Months|
|Function:||Electric Hydraulic Hole Puncher||Type:||Straightener Feeder & Uncoiler|
|Use:||Sheet||After-sales Service Provided:||Engineers Available To Service Machinery Overseas|
Precision nc feeder straightener 3 in 1 for punch, Ruihui feeder equipment
Solution for the deviation of pneumatic feeder material:
1. The mold is not properly installed in place, causing the material to run off when feeding. When installing a small mold on a large punching machine, the mold installation is often not in place. At this time, the center line of the mold is not on the same line as the center line of the feeder, and the deviation is inevitable. At this time, the mold mounting position is re-adjusted. Can be solved.
2. The position of the pneumatic feeder's retaining wheel is not properly adjusted, which causes the material to be deflected during feeding. Re-adjusting the position and width of the retaining wheel can be solved.
3. When the material is not squared during the feeding, the material is deflected into the feeder, and the material is retracted after retracting.
4. The wear of the O-ring seal causes the air leakage of the exhaust hole to cause the pneumatic feeder to not work normally. At this time, the O-ring can be replaced to solve the problem.
5. The looseness of the pneumatic feeder is incorrect, which causes the material to deflect and re-adjust the relaxation time of the R-type solenoid valve of the pneumatic feeder.
|Max. Line Speed(m/min)||16-24||16-24||16-24||16-24|
|Work Roll Number(pieces)||upper 6
|Feed Roll Number(set)||1||1||1||1|
|Power(V)||3 Phase 220V/380V/50HZ|
|tock Thicknees (mm)||Stock Width (mm)|
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
Contact Person: Calin Deng