|Place of Origin:||Guangdong, China (Mainland)|
|Certification:||CE, ISO certification|
|Minimum Order Quantity:||1 Set|
|Packaging Details:||Wooden Box or Vacuum Packing|
|Delivery Time:||30 work days|
|Payment Terms:||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Supply Ability:||30 Sets Per Month|
|Stock Width(mm):||50~600||Stock Thickness(mm):||0.2~3.2|
|Line Speed(m/min):||16~24||Coil Weight(Kg):||3000/5000|
|Work Roll Number(Pcs):||Upper 6/lower 5||Main Motor(Kw):||AC 4.5|
|Warranty Period:||12 Months|
The belt feeder is a kind of conveying equipment with mature production technology and wide use. It has the characteristics of the most typical continuous feeder and has developed rapidly in recent years.
Its main advantages are: simple structure, light weight and easy manufacture; flexible transportation route layout, wide adaptability, and can transport a variety of materials; fast conveying speed, long conveying distance, large conveying capacity and low energy consumption.
It can be continuously transported, work smoothly, and does not damage the materials being transported; it is easy to operate, safe and reliable, easy to maintain and repair, and low in maintenance and management costs.
The main disadvantage of the belt feeder is that the conveyor belt is easy to wear, and its cost is high (about 40% of the cost of the feeder); a large number of rolling bearings are required; the unloading device must be installed when discharging in the middle; the ordinary tape type is not applicable to When the conveying angle is too large.
At present, the belt feeder has been standardized, serialized, and the performance is constantly improved, and new models are constantly available.
The main advantages of the screw feeder: simple structure, low manufacturing cost, easy maintenance, good airtightness of the machine slot, multi-feed and multi-point unloading, one feeder can transport materials in both directions at the same time, Processes such as mixing, agitation, loosening, heating and cooling of the materials can also be carried out during the conveying process.
The main disadvantage of the screw feeder: in the conveying process, due to the friction between the material and the machine slot and the spiral body and the stirring of the material by the spiral body, the machine slot and the spiral blade are easy to wear, and at the same time, the material has a certain crushing effect and the conveying power. It is expensive.
|Max. Line Speed(m/min)||16-24||16-24||16-24||16-24|
|Work Roll Number(pieces)||upper 6
|Feed Roll Number(set)||1||1||1||1|
|Power(V)||3 Phase 220V/380V/50HZ|
|tock Thicknees (mm)||Stock Width (mm)|
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
Contact Person: Calin Deng