Profile Stamping Steel Coil Uncoiler Gear Feeder Four - Wheel Drived

Ruihui gear feeder are changed from the traditional two-wheel dual-drive mode to the four-wheel four-wheel drive mode. Compared with the traditional gear feeder, it has three significant advantages:

1. Since the feeding drive system adds the second roller set and the second gear combination excessive gear set, the two sets of roller sets all play the driving role, forming four-wheel four-wheel drive, and the friction coefficient of the roller surface can be controlled, thereby greatly improving Feed line speed.

2. Improve the feeding ability of the material to be sent by the feeder, such as the material to be sent in the width of the material, and the conveying capacity of the material to be sent in the range of 0-1 mm. Moreover, the feed line speed is not affected by these materials.

3. Due to the use of high-precision grinding gears, the transmission error is reduced. The hollow roller is used to reduce the quality and inertia of the feeding transmission system, improve the feeding accuracy, achieve higher speed feeding and improve production efficiency.

Since the surface of the roller is processed, the wear resistance of the roller is increased, the friction coefficient is increased, and the driving force of the roller is larger and it is not easy to slip. For the extra-wide material to be fed, the contact area between the roller and the sheet material is increased, thereby improving the jog braking performance of the feeder and reducing the sliding distance of the material to be conveyed.

Specification:
 

Straigtening performance:
 

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi