|Place of Origin:||Guangdong, China (Mainland)|
|Certification:||CE, ISO certification|
|Minimum Order Quantity:||1 Set|
|Packaging Details:||Wooden Box or Vacuum Packing|
|Delivery Time:||30 work days|
|Payment Terms:||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Supply Ability:||30 Sets Per Month|
|Stock Width(mm):||70-1000||Stock Thickness(mm):||0.6-6.0|
|Line Speed(m/min):||16~24||Coil Weight(Kg):||7000|
|Work Roll Number(Pcs):||Upper 6/lower 5||Main Motor(Kw):||Coil Weight(Kg)|
|Warranty Period:||12 Months||Max.Coil O.D.(mm):||1400|
|Coil I.D.(mm):||508||Feed Length(mm):||~500*|
|Mandrel Expansion:||Hydrauilc||Reel Motor(kw):||2.2|
Wafers are widely used in the manufacturing industry, and the use of punching machines for wafer blanking is one of the common uses of punching machines. At present, most of the stamping owners use the manual manual punching machine to feed the wafers. This type of production method is labor intensive. Once it is improperly operated or overworked, it will be seriously safe to feed into the press. The accident occurred.
Moreover, the manual feeding is more time consuming than the first feeding of the machine, the second precision is low, the production time is increased, the production efficiency is low, and the yield of the blanking wafer is low. Therefore, more and more customers have chosen to use a punching machine with a feeder to carry out continuous blanking processing.
The wafer processing line for the punching machine with the servo feeder can really improve the production efficiency and improve the finished quality of the wafer blanking.
However, due to the speciality of the wafer products, there is still a very big problem. That is, the current feeders can only feed on the same line whether it is an air feeder, a roller feeder or an NC servo feeder.
After the wafer is stamped, a lot of scraps are generated, which causes great material waste, and the production cost is not effectively controlled.
To this end, Ruihui Machinery has designed and manufactured a yaw NC feeder for wafer blanking and stamping processing customers. Compared with the standard NC feeder, it has added a left and right moving work frame controlled by a servo motor.
The position of the punching disc is adjusted by the yaw shift, and the automatic program arrangement enables the round cutting of the wafer to achieve a circular cross-cut, so that the material can achieve the highest utilization rate during the stamping work.
|Max. Line Speed(m/min)||16-24||16-24||16-24||16-24|
|Work Roll Number(pieces)||upper 6
|Feed Roll Number(set)||1||1||1||1|
|Power(V)||3 Phase 220V/380V/50HZ|
|tock Thicknees (mm)||Stock Width (mm)|
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
Contact Person: Calin Deng