Home ProductsSteel Coil Uncoiler

Metal Plate Feeding Step Steel Coil Uncoiler Hydraulic Rotary Feeder

Metal Plate Feeding Step Steel Coil Uncoiler Hydraulic Rotary Feeder

    • Metal Plate Feeding Step Steel Coil Uncoiler Hydraulic Rotary Feeder
    • Metal Plate Feeding Step Steel Coil Uncoiler Hydraulic Rotary Feeder
    • Metal Plate Feeding Step Steel Coil Uncoiler Hydraulic Rotary Feeder
    • Metal Plate Feeding Step Steel Coil Uncoiler Hydraulic Rotary Feeder
  • Metal Plate Feeding Step Steel Coil Uncoiler Hydraulic Rotary Feeder

    Product Details:

    Place of Origin: Guangdong, China (Mainland)
    Brand Name: RUIHUI
    Certification: CE, ISO certification

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 Set
    Packaging Details: Wooden Box or Vacuum Packing
    Delivery Time: 30 work days
    Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
    Supply Ability: 30 Sets Per Month
    Contact Now
    Detailed Product Description
    Place Of Origin: Guangdong, China (Mainland) Brand Name: RUIHUI
    After-sales Service Provided: Field Installation, Commissioning And Training, Engineers Available To Service Machinery Overseas Warranty: 1 Year
    Product Name: NC Servo Feeder Stock Width: 20-1300mm
    Stock Thickness: 0.3-3.2mm Motor: Yaskawa
    Bearing: Japan NSK Power: 3Phase 220V/380V/50HZ
    Releasing System: Pneumatic Type Speed(M/Min): 16

    Metal Plate Feeding Step, Stamping Process, Automatic Air Feeder, Hydraulic feeder, Rotary feeder
    http://www.ruihui.net

    The feeding step distance, that is, the feeding length of the single conveying material of the feeder, also referred to as the feeding length, is one of the core parameters of the air feeder.

    Its size is determined according to the actual stamping process of the punching die. Different stamping processes have different requirements for the feeding step.

    For this reason, the feeding step of the air feeder has a certain adjustment range, and it is an indispensable part to adjust the feeding step of the air feeder every time the new mold is replaced.

    The principle of the air feeder is similar to that of a medical injector, which pushes the moving splint through the cylinder to realize the feeding. The adjustment of the feeding step and the actual adjustment of the setting are the moving amount of the moving splint. The specific adjustment steps are as follows:

    1. In order to make the movement amount of the moving splint of the air feeder substantially the same as the feeding step, the required number of adjusting feeding step rings are mounted on the center rod.

    Special attention should be paid to this operation:

    • When installing the adjustment feed step spacer, make sure that the protective gloves are properly worn.

    • Do not operate if the air feeder feed step ring is not properly secured. If it falls off during operation, it will cause damage to the air feeder accessory parts.

     

    2. Loosen the locating bolts using the included hex wrench.

    3. The micro-adjustment of the feeding step is performed by adjusting the knob of the feeding step fine adjustment screw.

    Adjust the gap between the moving splint and the adjustment feed step, or the nylon backing using the vernier caliper.

    4. After the measurement is completed, it is necessary to lock the positioning screw, and then fix the feeding step fine adjustment screw.

    5. Perform a single stamping test on the punching machine. After multiple times, measure whether the feeding step is in line with the stamping processing requirements. If the step is correct, the automatic continuous stamping can be directly performed; if not, the adjustment step should be re-adjusted.
    air feeder

    Specification:
     

    Model MAC2-400 MAC2-500 MAC2-600 MAC2-800
    Stock Width(mm) 50-400 50-500 50-600 50-800
    Stock Thickness(mm) 0.3~3.2 0.3-3.2 0.3-3.2 -3.2
    Max.Coil Weight(kg) 3000 3000 3000 5000 5000 7000
    Max.Coil O.D.(mm) 1200 1200 1200  
    Coil I.D.(mm) 8 8 508 508
    Feed Length(mm) ~500* ~500* ~500* ~500*
    Max. Line Speed(m/min) 16-24 16-24 16-24 16-24
    Work Roll Number(pieces) upper 6
    lower 5
    upper 6
    lower 5
    upper 6
    lower 5
    upper 6
    lower 5
    Feed Roll Number(set) 1 1 1 1
    Main Motor(kw) AC2.9 AC2.9 AC4.4 AC4.4
    Mandrel Expansion hydraulic hydraulic hydraulic hydraulic
    Reel Motor(kw) 1.5 1.5 1.5 2.2 2.2 3.7
    Power(V) 3 Phase 220V/380V/50HZ
    Operating Air(Mpa) 0.49 0.49 0.49 0.49


    Straigtening performance:
     

    tock Thicknees (mm) Stock Width (mm)
    0.3 400 500 600 800
    0.4
    0.6
    0.8
    1.0
    1.2
    1.4
    1.6 470 470
    1.8 400 400
    2.0 360 360
    2.3 300 300 300 300
    2.5 230 230 230 230
    2.8 150 150 150 150
    3.2 110 110 110 110


    *1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
    Metal Plate Feeding Step Steel Coil Uncoiler Hydraulic Rotary Feeder
    Metal Plate Feeding Step Steel Coil Uncoiler Hydraulic Rotary Feeder

    1. Pre-Sales Service:We have professional designers to meet the different requirement of our customers.
    2. After-Sales service:We have an efficient team to meet 24*7 all day service.
    3. Full-Service:Actively cooperate with customers to deal with problems in equipment using.
    4. Engineers can provide service machinery overseas.

    Contact Details
    Dongguan Ruihui Machinery Manufacture Co., Ltd.

    Contact Person: Calin Deng

    Tel: +8613826917409

    Send your inquiry directly to us (0 / 3000)

    Best Products
    Other Products