Place of Origin: | Guangdong, China (Mainland) |
Brand Name: | RUIHUI |
Certification: | CE, ISO certification |
Model Number: | MAC4-400 |
Minimum Order Quantity: | 1 Set |
---|---|
Packaging Details: | Wooden Box or Vacuum Packing |
Delivery Time: | 30 work days |
Payment Terms: | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
Supply Ability: | 30 Sets Per Month |
Place Of Origin: | Guangdong, China (Mainland) | Brand Name: | RUIHUI |
---|---|---|---|
Condition: | New | After-sales Service Provided: | Field Maintenance And Repair Service, Engineers Available To Service Machinery Overseas |
Product Name: | NC Servo Feeder | Name: | NC Servo Feeder |
Stock Width: | 20-1000mm | Stock Thickness: | 0.3-3.2mm |
Releasing Performance: | -80 | Motor: | Yaskawa |
Bearing: | Japan NSK | Power: | 3Phase 220V/380V/50HZ |
High Light: | sheet straightening machine,metal straightener |
The servo feeder is an automatic device integrating digital, mechanical and pneumatic, and plays an important role in the high-end stamping industry.
The servo feeder is also a relatively sophisticated instrument. If it is used improperly or for a long time during use, it is easy to cause mechanical failure. The installation failures caused by the installation are mostly caused by external equipment failure.
Problem: The relaxation device does not smoothly cause an alarm;
Solution:
1. Check if the mold is internally defined as a guide pin, carefully check and correct.
2. Observe whether there is any deviation in the feeding direction, and then check if the working direction is correct and the mold is normal.
3. The eccentric shaft and the loose shaft are oil-dead, use kerosene and add butter.
Problem: Unstable feeding causes an alarm;
Solution:
1. check the mold for problems
2. Check whether the air pressure reaches 0.45kgf/cm3 under the condition that the feeder continuously presses normally;
3. Whether the delivery time is correct;
4. check whether the motor is normal (basic can rule out such cases);
Problem: The irregularity of the feeding causes the alarm;
Solution:
1. Check whether the pressure plate is evenly stressed. If it is uneven, adjust the pressure of the relaxation device.
2. Whether the feeding mechanism used is pneumatically relaxed, check whether the air compressor pressure is normal.
3. Check whether the coils fed into the material rack are on the same level as the feeder and mold.
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 |
upper 6 lower 5 |
upper 6 lower 5 |
upper 6 lower 5 |
||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
Contact Person: mandy
Tel: +8613825768692
Phase Style Automatic Nc Servo Sheet Metal Coil Feeder Stam
High Speed Nc Servo Roll Feeder For Matel Coil Machine Pneumatic release RNC-800HA
Punching Steel Straightening Nc Servo Feeder Machine / Nc Roll Feeder
OEM CCS Nc Servo Roll Feeder and Uncoiler Straightener RNC-400F
Auto High Speed Steel Coil Feeder Machine For Continuous Multiple Project Processing
Latest High Speed Mechanical Roll Feeder / Punch Press Feeder
Precision Coil Decoiler Straightener Feeder For Metal Stamping / Stainless Steel
Uncoiler And Decoiler Straightener Press Feeding Equipment For Sheet Metal
Coil Sheet Automatic Decoiler Straightener Feeder For Press Line(MAC4-800F)