 |
| Place of Origin: | Guangdong, China (Mainland) |
| Brand Name: | RUIHUI |
| Certification: | CE, ISO certification |
| Model Number: | MAC4-400 |
| Minimum Order Quantity: | 1 Set |
|---|---|
| Packaging Details: | Wooden Box or Vacuum Packing |
| Delivery Time: | 30 work days |
| Payment Terms: | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability: | 30 Sets Per Month |
| Place Of Origin: | Guangdong, China (Mainland) | Brand Name: | RUIHUI |
|---|---|---|---|
| Condition: | New | After-sales Service Provided: | Field Maintenance And Repair Service, Engineers Available To Service Machinery Overseas |
| Stock Width: | 20~300mm | Stock Thickness: | 0.3~3.2mm |
| Stock Thickness*Stock Width: | 2.0*200/3.2*80 | Pass Line: | 70~170mm |
| Releasing Performance: | ~80 | Motor: | Yaskawa |
| Bearing: | Japan NSK | Main Motor: | AC0.75 |
| High Light: | decoiler and straightener,hydraulic straightening machine |
||
The servo feeder adopts the combination of high-tech force distance and position control, servo motor and its driving power, and is equipped with high-speed calculation and precise control. It has a good man-machine interface and completely shakes off the traditional power transmission, pressure transmission and A new type of feeding device that mechanically adjusts the feed length.
It can be matched with high-speed large-step feeding of punching machine, and the feeding is accurate and reliable. It can also cooperate with various working methods to improve the flexibility of the machine, simplify the operation steps and greatly improve the production efficiency.
First, the servo feeder adjustment test example:
1. Start the correcting machine or material holder and slowly release the material. The servo feeder adjusts the position of the two stopper wheels according to the width of the material, so as not to hinder the operation of the material.
2. Relax the cylinder on the platform, put the material between the upper and lower rollers, put down the cylinder to press the material, adjust the air source pressure gauge to avoid the material is not tight and slip, resulting in inaccurate feeding. When the thickness of the material changes, it must be readjusted. .
3. After setting the feeding length, look at the actual situation, and set the feeding speed accordingly. The method of setting is described in detail in the previous section.
4. After the relevant parameters of the feeding are set, the actual feeding length is not the same as the set value due to the number of the divisor. Therefore, in the manual mode, press the feeding test, punching, stroke, stamping, and adjusting the feeding. The actual length.
5. The adjustment of the feeding start is adjusted by the rotating cam of the punching machine. The so-called feeding start signal is to start at which angle of the punching crankshaft.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 |
upper 6 lower 5 |
upper 6 lower 5 |
upper 6 lower 5 |
||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
Contact Person: mandy
Tel: +8613825768692
Phase Style Automatic Nc Servo Sheet Metal Coil Feeder Stam
High Speed Nc Servo Roll Feeder For Matel Coil Machine Pneumatic release RNC-800HA
Punching Steel Straightening Nc Servo Feeder Machine / Nc Roll Feeder
OEM CCS Nc Servo Roll Feeder and Uncoiler Straightener RNC-400F
Auto High Speed Steel Coil Feeder Machine For Continuous Multiple Project Processing
Latest High Speed Mechanical Roll Feeder / Punch Press Feeder
Precision Coil Decoiler Straightener Feeder For Metal Stamping / Stainless Steel
Uncoiler And Decoiler Straightener Press Feeding Equipment For Sheet Metal
Coil Sheet Automatic Decoiler Straightener Feeder For Press Line（MAC4-800F)
