Metal Strip Feeding Punch Roller Feeder Electronic Parts Processing Stamping

Metal Strip Feeding Punch Roller Feeder Electronic Parts Processing Stamping

In the processing of electronic parts products, it is often necessary to feed the metal strip into a high-speed continuous punch to form the desired shape to meet different needs.

Stamping includes blanking die and forming die. In the stamping process, the problem of feeding the metal strip into the punching machine is often involved. At present, the common practice is to use a feeder to feed the metal in one way. The strip is fed into the press for stamping.

The working principle is as follows: when the punching machine reaches the feeding stroke, the feeding metal coil of the metal strip to be stamped is fed into a punching step in the punching machine to be punched.

When the feeding type roller feeder is driven by the eccentric disk and the pulling rod, the pulling roller synchronously moves due to the driving of the rocker arm, so as to reach the feeding belt when the feeding roller sends a step distance while the punching to the feeding stroke The material roller pulls the strip to send a step to the feeding direction.

The metal strip is fed into the punching machine, so that the metal strip in the punching machine is kept flat, and the stacking material is not generated by arching, so as to facilitate the stamping production of the ultra-thin material, and the tail is reduced by adopting the one-feed one-feed type feeding method. The production of materials maximizes material utilization.

Products:

Specification:
 

Straigtening performance:
 

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi