Hemiplegia NC Feeder Stamping Die Material / Automatic Feeding Equipment

Hemiplegia NC feeder, stamping die material, automatic feeding equipment

 
The yaw NC feeder is the most commonly used automatic feeding device for wafer blanking. It drives the feeder to the left and right yaw by swinging the platform, so that the blanking position of the wafer can be rounded and cut, maximizing the material utilization. rate.
 
In order to achieve efficient blanking and stamping, the feeding direction of the sitting mode of the sitting method must be converted to the XY vertical axis coordinate, in order to achieve multiple circular and circular tangent. Ruihui Machinery realizes the mathematical operation by establishing mathematical models and formulas. With this conversion, we have designed two efficient processing methods, S-type and M-type, to achieve optimal layout.
 

When the coil is set in the heavy material frame, the cylinder is under the control of the solenoid valve, and the piston rod of the cylinder moves to move the movable slider on the main shaft to extend the tray of the tray while the tray of the tray moves in the inner hole of the coil. The coil is tightened to achieve the purpose of tightening the coil.

The hydraulic heavy-duty material frame adopts the swallow-tailed inclined slider hydraulic expansion and contraction structure. The hydraulic cylinder is used to push and pull the pyramid mandrel, and the tile of the reel is driven to move radially, so as to achieve the purpose of shrinking and shrinking the tray, which can not only be quickly installed. Disassemble the coil to ensure smooth loading and unloading of the coil.

Moreover, the fixed reel can be kept in tension and fixed connection with the rotating component of the material frame, thereby facilitating the rotating part of the material frame to drive the coil to rotate coaxially.

Products:


 
Specification:
 

Straigtening performance:
 

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi