Stamping Automation NC Decoiler And Straightener Steel Bonded Carbide Stamping Process

Stamping Automation NC Feeder, Steel Bonded Carbide Stamping Process, NC Feeder

Advantages of the high-speed production line of silicon steel sheet stamping consisting of NC feeder with high-speed punching machine compared with the previous single-die process:

1. The single die process sequence is first cut, then the holes at both ends are punched out, and then the middle hole is punched out, and finally the chip product is formed, and the whole process is divided into four processes.

The automatic production process of NC feeder with high-speed punching machine is to punch and cut one punch, and the whole process has only one process, the efficiency is high and the product hole is accurate.

2. The single die process adopts manual feeding mode, which is slow in speed, low in efficiency, high in operation danger, and prone to work accidents.

The automatic production of NC feeder with high-speed punching machine adopts high-precision NC feeder to feed, with high precision and good safety. It is convenient and quick to change the feeding step by parameter setting of its controller.

3. The NC feeder is equipped with a progressive die stamping process consisting of high-speed punching machine. The punching speed is increased from 50-80 times/min to 150-250 times/min, which greatly improves the production efficiency.

Really achieve high efficiency, stability, energy saving, and reduce consumption. After practical production verification, the production efficiency and the quality of the cut film are very significant.

Products:

Specification:
 

Straigtening performance:
 

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi