|Place of Origin:||Guangdong, China (Mainland)|
|Certification:||CE, ISO certification|
|Minimum Order Quantity:||1 Set|
|Packaging Details:||Wooden Box or Vacuum Packing|
|Delivery Time:||30 work days|
|Payment Terms:||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Supply Ability:||30 Sets Per Month|
|Stock Width(mm):||50~600||Stock Thickness(mm):||0.3~3.2|
|Line Speed(m/min):||16~24||Coil Weight(Kg):||3000/5000|
|Work Roll Number(Pcs):||Upper 6/lower 5||Main Motor(Kw):||AC 4.5|
|Warranty Period:||12 Months|
mechanical roll feeder,
roll feeder machine
1. Start the leveling machine or material frame on the stamping production line and let it slowly feed the NC feeder.
2. Adjust the position of the two stopper wheels on the NC feeder according to the width of the coil, so that the width of the stopper wheel matches the width of the coil, taking care not to hinder the operation of the coil.
3. Lift the loose handle of the NC feeder, place the coil between the upper and lower rollers, press the release handle, loosen the fastening screw of the material thickness adjustment handle, and adjust the handle up and down to ensure that the relaxation bracket has a swing clearance of about 5 mm. Then tighten the fastening screws of the handle.
4. Press the inch button and the material is introduced into the mold.
5. adjust the pressure spring (the working principle of the pressure spring is to apply pressure to the upper roller, so that the upper roller can press the material, and the coil is sent out) pressure, so that the coil will not slip when passing through the NC, if the coil material When the thickness becomes larger, the pressure should be increased.
6. Enter the feeding length on the operation panel of the NC feeder, and then set the corresponding feeding speed according to the actual production demand of the stamping to ensure that it is synchronized with the punching machine.
7. When the leading pin tip of the punching die enters the guide pin hole, adjust the loose screw to the bearing that touches the loose bracket until the coil is loosened and the screw nut is locked.
8. Adjust the start feeding signal of the NC feeder by adjusting the rotating cam of the punching machine (starting the feeding signal, which is the angle at which the punching crankshaft starts feeding). The recommended angle is 9:00 to 3:00 (240-90).
9. After the setting is completed, the single-action punching machine will observe the discharge length and appearance with one stroke feeding, and adjust to the required standard.
10. After confirming the above work, press the automatic button press line to continuously produce.
|Max. Line Speed(m/min)||16-24||16-24||16-24||16-24|
|Work Roll Number(pieces)||upper 6
|Feed Roll Number(set)||1||1||1||1|
|Power(V)||3 Phase 220V/380V/50HZ|
|tock Thicknees (mm)||Stock Width (mm)|
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
Contact Person: mandy