18KW Decoiling And Straightening Machine , Ball Screw Mold Processing Grommet Steel Perforating Machine

Note on the servo feeder:
1. The electrical equipment works under normal voltage. If the voltage is constantly changing, the life of the electrical components will be seriously shortened and the failure rate will increase sharply. The electrical components should be guaranteed to work in a dry environment, such as damp. Continue to work after drying. Exposed lines should be checked for insulation frequently to avoid leakage accidents.
2. This machine must not be overloaded. The operator at the production site must operate in accordance with the instructions in this instruction manual. In particular, it is necessary to master the essentials and safety when loading. It must be supervised by the person in charge. If there is any abnormal situation, the press must be stopped immediately. .
In the automatic operation state, the servo feeder belt is controlled by the sensing device. In the manual state, the forward and reverse rotation actions can control the advance and retreat of the material.
3. The linear guide and the ball screw of the yaw unit are precision components, and it is strictly forbidden to knock and collide. Also check for loose screws and lubricated oil before work every day.

Specification:
 

Straigtening performance:
 

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi